freezing disk sys crcdisk sys i ve got possible sol

Warning...long winded skip to end for solution withot the history Got my DVD's from MS.
Booting from DVD resulted in a freeze right after loading files (the very first one) Ran Setup from within XP, it would copy files and on the first reboot it would freeze in the same place. Tried starting in safe mode, and it would lock up when loading disk.sys
After a long while of messing with it, I noticed that the date was munged in my bios. So I set the date to current time, and my PC no longer locked at disk.sys and I was able to finish the install.
Upon reboot however I now had a lockup on crcdisk.sys. My first thought was that I hosed a setting in bios, so I opened my case to jumper clear CMOS. Got it all set back to factory defaults (with the correct date...this may not have really affected the disk.sys lockup) closed my case and tried to install....and it froze on crcdisk.sys again....
So back into bios I went to disable hardware and try different clock speeds, picked one that prevented my computer from booting, so I once again opened my case cleared cmos and decided to leave the case open...because it was bound to happen again. Factory defaults again an vista installed without a hiccup. So I rebooted and I was able to bring the system up in safe mode to try and resolve a video card conflict (still working on that one and am posting this in safe mode right now)
I figured I was done with the inside of my case so I closed it back up, tried to change my vid drivers...rebooted...and froze on crcdisk.sys again....so I opened my case and rebooted and it worked in safe mode again....
I have a fan on the door of my case, everytime I open the case I have to unplug the fan. Unplugged, vista works, plugged in....I'm maxing my power supply and Vista cannot run properly. I have not yet done testing to see if it was an unbalanced rail issue or if I just had too much draw period. I was just happy to get it running and after I figure out my video card problem, I will revist the power issue
SOLUTION: For those of you who do not like a long read Try Unplugging the power from all non-essential items...primarily case fans...yes I know, they are essential....but they also put a heavy load on the el-cheapo sparkle power power supplies that so many vendors put in their PC's...My test box has a FSP 450watt....But I also run 11 fans....so it's a lot of juice.
-Ben

Reducing power requirements makes sense to me.
"Ben Salisbury" wrote in message

Warning...long winded skip to end for solution withot the history Got my DVD's from MS.
Booting from DVD resulted in a freeze right after loading files (the very first one) Ran Setup from within XP, it would copy files and on the first reboot it would freeze in the same place. Tried starting in safe mode, and it would lock up when loading disk.sys
After a long while of messing with it, I noticed that the date was munged in my bios. So I set the date to current time, and my PC no longer locked at disk.sys and I was able to finish the install.
Upon reboot however I now had a lockup on crcdisk.sys. My first thought was that I hosed a setting in bios, so I opened my case to jumper clear CMOS. Got it all set back to factory defaults (with the correct date...this may not have really affected the disk.sys lockup) closed my case and tried to install....and it froze on crcdisk.sys again....
So back into bios I went to disable hardware and try different clock speeds, picked one that prevented my computer from booting, so I once again opened my case cleared cmos and decided to leave the case open...because it was bound to happen again. Factory defaults again an vista installed without a hiccup. So I rebooted and I was able to bring the system up in safe mode to try and resolve a video card conflict (still working on that one and am posting this in safe mode right now)
I figured I was done with the inside of my case so I closed it back up, tried to change my vid drivers...rebooted...and froze on crcdisk.sys again....so I opened my case and rebooted and it worked in safe mode again....
I have a fan on the door of my case, everytime I open the case I have to unplug the fan. Unplugged, vista works, plugged in....I'm maxing my power supply and Vista cannot run properly. I have not yet done testing to see if it was an unbalanced rail issue or if I just had too much draw period. I was just happy to get it running and after I figure out my video card problem, I will revist the power issue
SOLUTION: For those of you who do not like a long read Try Unplugging the power from all non-essential items...primarily case fans...yes I know, they are essential....but they also put a heavy load on the el-cheapo sparkle power power supplies that so many vendors put in their PC's...My test box has a FSP 450watt....But I also run 11 fans....so it's a lot of juice.
-Ben

If you get your video conflict worked out please post back as I feel this is causing my slooooooooow boot into Vista :(
"Colin Barnhorst" wrote:

Reducing power requirements makes sense to me.
"Ben Salisbury" wrote in message Warning...long winded skip to end for solution withot the history Got my DVD's from MS.
Booting from DVD resulted in a freeze right after loading files (the very first one) Ran Setup from within XP, it would copy files and on the first reboot it would freeze in the same place. Tried starting in safe mode, and it would lock up when loading disk.sys
After a long while of messing with it, I noticed that the date was munged in my bios. So I set the date to current time, and my PC no longer locked at disk.sys and I was able to finish the install.
Upon reboot however I now had a lockup on crcdisk.sys. My first thought was that I hosed a setting in bios, so I opened my case to jumper clear CMOS. Got it all set back to factory defaults (with the correct date...this may not have really affected the disk.sys lockup) closed my case and tried to install....and it froze on crcdisk.sys again....
So back into bios I went to disable hardware and try different clock speeds, picked one that prevented my computer from booting, so I once again opened my case cleared cmos and decided to leave the case open...because it was bound to happen again. Factory defaults again an vista installed without a hiccup. So I rebooted and I was able to bring the system up in safe mode to try and resolve a video card conflict (still working on that one and am posting this in safe mode right now)
I figured I was done with the inside of my case so I closed it back up, tried to change my vid drivers...rebooted...and froze on crcdisk.sys again....so I opened my case and rebooted and it worked in safe mode again....
I have a fan on the door of my case, everytime I open the case I have to unplug the fan. Unplugged, vista works, plugged in....I'm maxing my power supply and Vista cannot run properly. I have not yet done testing to see if it was an unbalanced rail issue or if I just had too much draw period. I was just happy to get it running and after I figure out my video card problem, I will revist the power issue
SOLUTION: For those of you who do not like a long read Try Unplugging the power from all non-essential items...primarily case fans...yes I know, they are essential....but they also put a heavy load on the el-cheapo sparkle power power supplies that so many vendors put in their PC's...My test box has a FSP 450watt....But I also run 11 fans....so it's a lot of juice.
-Ben

My problem started when my lapotp (MSI MS1029) froze when running super pi and cpu z. Afterwards, when I tried to boot it would hang on the loading vista screen, and in safe mode it would hang on crcdisk. After a lot of searching, I think I've found a possible solution:
This is what I did:
1. Leave your laptop running until the battery COMPLETELY runs out. Like, when you press power absolutely nothing happens.
2. Open up your laptop.
3. Disconnect the RAM.
4. Disconnect any fans you may have (yes CPU will get hot but for a little bit the passive cooling should cut it - do NOT leave it on for long!)
5. Disconnect the wireless card (many people mentioned PCMCIA as the source of this problem, so I took it out).
6. Reinstall one stick of RAM.
7. Try to boot in normal mode. Leave the laptop bottom open for some CPU cooling.
8. If it worked, you can put everything back in, one at a time to see what was causing the problem.
Hope this helps guys, and if it does, please bump it for others to see.
Good luck!
-- veer